Push   To   Call   Us

Lock Surgeon Door Break-in Repair Edmonton South

Door Security Hardware & Frame Repair

Edmonton South home and business break-ins are disruptive. Doors can be kicked in or crow-barred to gain entry. Lock Surgeon mobile door repair servicemen in Edmonton South and are bring a wide variety of security hardware to your home or business to quickly repair the damage from a break and enter event. Lock Surgeon's Edmonton South mobile door service will help with break-in repairs and prevention in Edmonton South and area. If it's break in repair or security hardware, it's got to be Lock Surgeon's Edmonton South mobile door break-in repair service.

---

Edmonton South Mobile Door Break-in Repair Service

Break-ins can happen anytime, Lock Surgeon has the mobile locksmiths to help you when these situations arise. Lock Surgeon Edmonton South door repair specialists are always on call and available to help. If its weekend or evening break-in door repair service you need Lock Surgeon's Edmonton South dispatch centre will take your call and dispatch a locksmith to your home, business, warehouse, apartment or office to fix, repair and adjust damaged doors.

---

Every year Edmonton South homes and businesses suffer break-in damage

• The entry point is often a poorly secured door which, when attacked, will break down.
• As shown on right: an unsecured door frame split easily during a successful break in attempt.
• Lock Surgeon Edmonton South have the hardware and expertise to significantly improve the security of any entry door or frame.
• It's time to have Lock Surgeon install security hardware that is tough enough to keep you and what you care about safe and secure.
• Proactive or reactive, Lock Surgeon Edmonton South have the security hardware products to reduce your risk of suffering through a break-in event.
• Mobile emergency break-in repair throughout Edmonton South and area.

---

Door Break-in Repair Service

On-site repairs of home, business and office door break-ins

Mobile emergency door break-in repair

Lock Surgeon's mobile door handyman repair service experts will come to your broken door and make the necessary repairs. Doors can be completely changed out and replaced with new doors or original doors and frames can be repaired and resecured. Whether it's a main front entry to your home, back entry door, garden door, patio door or garage man door, Lock Surgeon has the expertise to repair, replace, fix and secure your door.

---

Door Repair Hardware

Door security Reinforcements

Door Savers, Security Strikes, Bolt Buddy & Door Guardians to Help Repair Door Break-ins

Lock Surgeon's mobile repairman has a number of hardware door repair products, such as: the Door Saver that is built to cover a damaged door lock area or provide security. Security Strikes are used to reinforce the door frame in the deadbolt area and also help with door frame repairs. Bolt Buddy, one of the best choices of hardware Lock Surgeon's door service person can provide to repair or secure a home door and frame. Door Guardians are an excellent secondary lock and reinforcement product.

---

Commercial Door Break-in Repairs

Mobile on-site door break-in repairs

Warehouse door repair and replacement

Hinges break, door closers fail, panic bars are bypassed, handles are jammed, Lock Surgeon can repair all your apartment and warehouse door issues including break-in damage. Lock Surgeon's mobile service handiman can make all the repairs required or replace your steel door, panic bar, door handle and door closer as needed. Lock Surgeon can bill you directly, accepts visa, mastercard or debit on-site or can bill an established account.

---

Apartment and Storefront Door Break-in Repair

Mobile Emergency door service

Apartment and storefront door break-in repair

Lock Surgeon works with realestate and property managers, apartment managers, mall management teams and individual apartment owners to ensure that their doors are kept operating safe and securely. Whether it's door maintenance, door repair or break-in repair Lock Surgeon's team of door repairmen can come to your site to provide new hinges, electric strikes, paddle handles and panic bars.

---

Break-in Repair Security Hardware for Doors

Door security hardware and door reinforcements

Door edge blocker, door edge repair reinforcement

Door edge reinforcement products can be used to repair or secure the latch-side of any outswing glass-aluminium or steel commercial door. Have the hardware professionally installed by Lock Surgeon's mobile door repair team or stop by one of 3 conveniently located sales and service centres.

---

Door Barrier Bar

Locking device for back warehouse exit doors

Security for back entry break-in attempts

This barrier bar provides easy exit in emergencies.

---

Follow these links for related pages

---

Door Security Window Bars Expandable security gates in white or black

Window bar security for storefront doors and glass

Expandable window bar gates fold open and hide at the side of the door frame to allow easy access during business hours, when security gates are closed they provide security after business hours. These window bar gates deter break-in attempts and storefront window bars can secure your business. Custom made in a variety of sizes to match your storefront security needs.

---

Door Reinforcement & Strike Repair Products Presented in "Like" Groups For Easy Reference.

Door reinforcement repair services and installation provided by Lock Surgeon's mobile service.

---

Don-Jo Cylindrical & Deadbolt Wrap Around Plates

Wrap around plates for cylindrical door locks and deadbolts

All latch embossed plates (CW) have stainless steel threaded insert so latch mounting screws securely hold. Constructed of 22 gauge material. Available for cylindrical door locks with 2-1/8" hole, deadbolts with 1-1/2" hole, Locks with extended brackets and flat front wrap-around with 2-1/8" hole. Comes in polished brass, stainless steel and antique brass.

Door wraps are used to provide additional security to doors and or make repairs where door has been attacked during a break-in event. Lock Surgeon's handy mobile door reinforcement expert can match your door handle or deadbolt requirements to the correct door wrap reinforcement for your storefront, warehouse, apartment complex, condominium entry or even residential home.

---

Don-Jo Combo & Blank Wrap Around & Edge Reinforcer

Combination wrap around plates with 2 Holes, Blank wrap around with trim screws, Door edge reinforcer for deadbolts & Key-in-knob locks

Constructed of 22 gauge material. Door thickness: 1-3/4". Available for 1-1/2" top & 2-1/8" bottom with 4" centres, 1-1/2" top & 2-1/8" bottom with 6" centres, 2-1/8" holes top & bottom with 3-5/8" centres and 2-1/8" holes top & bottom with 6" centres.

Blank Wrap Around Plates With Trim Screws:

Constructed of 22 gauge material. Long and short. Available in stainless steel and polished brass.

Door Edge Reinforcer For Deadbolts & Key-In-Knob Locks:

Constructed of 22 gauge material. Available in stainless steel and polished brass.

Double-hole door wraps are used to reinforce or repair door damage by providing additional security to both the handle and deadbolt at the same time. Blank sets are available for custom backsets or custom sized holes. Door edge reinforcement can be used to avoid backset and hole size issues. Lock Surgeon's mobile door reinforcement crew will match the right door wrap product to your needs whether for repairs or additional security.

---

Don-Jo Specialty Wrap Around

Mortise lock wrap around plate for 86 cut-out

for use with heavy duty grade 1 & 2 key-in-lever, for KABA/Simplex 1000, for conversion of Simplex 1000 series & alarm lock DL2500, 2700/T2 & 3000 series 8" x 1-1/4" recess. Drill spindle and thumb turn holes in field. Rectangle size: 1-5/8" x 7-5/16". Constructed of 22 gauge material. Door thickness: 1-3/4". Available in stainless steel.

For Use With Heavy Duty Grade 1 & 2 Key-In-Lever:

Works with Schlage Rhodes, Arrow Sierra, Yale Augusta, Corbin Russwin 3300 & 3600, Falcon T & B series, LSDA & other Grade 1 & 2 lever sets. Constructed of 22 gauge material. Door thickness: 1-3/4". Available in stainless steel.

For Kaba/Simplex 1000:

Works with Simplex 1000 lock. Constructed of 11 gauge material. Door thickness: 1-3/4". Available in stainless steel.

For Conversion of Simplex 1000 Series & Alarm Lock DL2500, 2700/T2 & 3000 Series:

For conversion of Simplex 1000 series, Alarm Lock DL2500, 2700/T2 & 3000 series to key-in-knob lock. Constructed of 22 gauge material. Door thickness: 1-3/4". Available in stainless steel.

These unique and custom shaped door wraps provide additional security or repair for lock-sets such as the simplex unican digital entry or mortise cassettes.

---

Don-Jo Inswing, Narrow Stile & Universal Latch Guards

Inswing latch guard, narrow stile latch guards for aluminium entrance door latches & electric strikes

Plates mounted on frame & door interlock to prevent prying. 6" version for use with key-in-knob and deadbolt locks. 12" version for use with Mortise Locks, Simplex 1000 series, Alarm Lock DL-2500, DL-2700 & 3000, Card access systems etc. Constructed of 14 gauge steel. Available in brass plated or silver coated.

Narrow Stile Latch Guards For Aluminum Entrance Door Latches & Electric Strikes:

LP307 for Aluminum Entrance Doors: fits over cylinder. Lock removal not required. Hand carriage bolt and rivet supplied. No specific tools required. 3/8" offset. Constructed of 12 gauge material.

GLP307 for Aluminum Entrance Doors - Solves Pull Handle Interference: solves pull handle interference handed. Centre of cylinder hole is 2-1/2" from end of plate.

NELP207: Works with Adams Rite locks. Protects electric strikes from attacks. Cylinder collar protects from wrenching. Protects from crowbar attacks.

ELP208/ELP208P For Use With Electric Strike: Designed to fit most electric strikes. Completely encases the keeper for maximum protection. Use with mortise, keyless locks & exit devices. Constructed of 12 gauge steel.

LELP208: Fits up to 3-3/4" rose.

---

Don-Jo Outswing Latch Guards

Outswing latch guards

LP111/LP211: Completely covers the strike plate. Furnished with carriage bolts, washers & acorn cap nuts for safety & strength. Fits 2-3/4" and 2-3/8" backsets. Constructed of 12 gauge material. Material: LP111 - stainless steel, LP211 - steel.

MLP211: Furnished with carriage bolts, washers & acorn cap nuts for safety and strength. Constructed of 12 gauge steel.

PLP111: Solid steel pin prevents spreading of door from frame. Pin is welded on back leaving no visible point of attack from outside. Constructed of 12 gauge stainless steel.

LP107/LP207: Furnished with carriage bolts, washers & acorn cap nuts for safety and strength. Constructed of 12 gauge. Material: LP107 - stainless steel, LP2017 - steel.

CLP110: Commercial type. Architectural design. 10" for mortise locks. Concealed welded studs with fasteners. Constructed of 12 gauge stainless steel.

NLP206: Narrow commercial type. 6" for key-in-knobs. 10" for mortise locks. Constructed of 12 gauge steel.

A variety of latch guards are available to provide door latch security in a number of situations for commercial doors, warehouse doors, apartment doors and storefront doors. There are also some latch guards that will accommodate electric strikes.

---

Don-Jo Outswing & Electric Strike Latch Guards

Outswing latch guards, universal latch guard & slipper latch protector

Short Outswing Latch Guards: Furnished with carriage bolts, washers & acorn cap nuts for safety & strength. Works with up to 3-3/4" rose. Constructed of 12 gauge steel. 3/8" offset. Available in brass plated or silver coated.

Angle Outswing Latch Guards: 6" for key-in-knobs. 10" for mortise locks. Constructed of 10 gauge steel. 1-1/2" sheet metal screws for wood or metal. Available in silver coated.

Adams Rite Latch Lock: Reversible. 3/8" offset, 1-7/16" hole, 1-1/8" backset. Constructed of 12 gauge steel. Available in silver coated.

Folger Adam Electric Strike: Works with Folger Adams 310 & 710 electric strike models. Constructed of 12 gauge stainless steel. Available in stainless steel.

Universal Latch Guard:

For outswing doors with 1" x 8-3/4" cutout. For all backsets, single locks, double locks up to 6" on centre & mortise locks. Protects latch or bolt and conceals lip of existing strike. Available in satin chrome, brass plated, duro coated or silver coated.

slipper Latch Protector:

Sleek design allows for easy install. Mounts under the lockset. Works with most grade 1 & 2 levers and knobs. Prepped for most commercial locks. Available in stainless steel.

Outswing latch guard is made to protect latches on doors such as laundry rooms, apartments, commercial glass-aluminium doors. The universal latch guard is stocked on all Lock Surgeon's mobile service trucks to allow for quick fix by our door reinforcement repair personnel.

---

Don-Jo Filler & Conversion Plates, Electric Strike Filler Plates & Scar Plates

Filler & conversion plates, electric strike filler plates & scar plates

Available plates for: "T" Strike with 160 cutout, ANSI strike cutout, 161 strike cutout, 86 morise cutout, mortise to 161 KIK cutout, door hinge cutout, .060 hinge shim and .090 hinge shims.

Electric Strike Filler Plates:

Fits selected Folger Adams, Von Duprin and Rofu strikes. Constructed of 13 gauge steel.

Scar Plates:

Used to convert 2-3/8" to 2-3/4" backset.
DSP135: Fits under deadbolt collar.
SP135: Fits uner rose of key-in-knob or deadbolt locks.

Door filler and scar plates are used when changing the function of a door or hardware item.

---

Don-Jo Hole Filler Plates, Remodel Kit, Door Pull & Hinge Pins

Hole filler plates, remodel plates & kit, door pulls & hinge pins

BF135: Covers up to 3-3/4" hole. Finish - Prime Coat.

BF161: Covers up to 2-1/8" hole. Finish - Brass Plated, Prime Coat or Silver plated.

BF178: Covers up to 1-1/2" hole. Finish - Prime Coat

PDF161 Covers up to 2-1/8" hole under rim panic device. Finish - Prime Coat.

CP258: 2-5/8" cylinder plate has indents at 3 & 9 o'clock to prevent collar from shifting on wood or metal. Can be used with rim or mortise cylinders. Finish - Brass Plated and Silver Coated.

Remodel Plates & Kit:

RP13509: Escutcheon for remodelling from mortise lock to key-in-knob.

RPK109: Kit version includes 2 of RP13509 plates with 1 of CV86 mortise to key-in-knob filter adapter plate.

Door Pull:

Door pull with a 2-1/8" hole. Finish - stainless steel.

Hinge Pins:

Used for preventing the removal of doors by pulling the hinge pins. 2 per package.

Filler plates and remodel kits are used to fill deadbolt or handle holes that are no longer required or cover damaged areas.

---

Don-Jo Lip Strikes, Long Strikes, Push/Pull Plate & Kick Plates

2-3/4" extended lip strikes, long strikes & push/pull plate & kick plates

For use where strike holes are inset into the jamb. Constructed of 13 gauge material. Brass plated.

Long Strikes:

Designed to work with key-in-knobs or deadbolts. Constructed of 13 gauge steel. Single hole to work with key-in-knob or deadbolt. Double Hole to accommodate 3-5/8" & 4" centres. Double hole to accommodate 5-1/2" & 6" centres.

Push/Pull Plate & Kick Plates:

1866: Constructed of 11 gauge stainless steel. Projection 1-1/4". ANSI A156.6 J303.

KP: Kick plate packaging includes an outer corrugation that protects the kick plate and allows it to be hung for display or stacked. Finish - stainless steel.

Lip strikes can be used where door jambs are wider than standard. Long strikes are typically used to reinforce the door frame edge and repair deadbolt strike area from damage that may have incurred by break-in attempts or preventatively to stop break-in attempts from occurring. Kick plates are added to the bottom of the door to reduce the wear in the foot traffic area.

---

Don-Jo Deadbolt Security Strike, T-Strike & Door Hardware

Deadbolt security strikes, T-Strike & door hardware

Supplied with 3" screws to penetrate frame studs for additional strike strength. Constructed of 13 gauge steel. Finshed in: silver coated, brass plated or silver plated.

"T" Strike:

Constructed of 18 gauge material. Finished in stainless steel.

Door Hardware:

1550/1551: Aluminum Door Flush Bolt Radius end. 1550 - 1/8" offset, 1551 - 1/4" offset.

1555: Metal Flush bolt UL rated, 3/4" bolt throw, 3/4" rod backset, 12" rod length, 1-1/2" adjustable bolt head. Fits ANSI door & frame prep. Metal doors faceplate: 1" x 6-3/4", strike: 15/16" x 2-1/4", guide: 1" x 2".

1557: Wood Flush Bolt UL Rated, 3/4" bolt throw, 3/4" backset. Wood door faceplate: 1" x 6-3/4", strike: 15/16" x 2-14". door strength maintained by corner reinforcement plate.

1603: Door Flip Guard Ball bearing design secures flip guard to lock door from interior for additional security.

2080: Gravity Door Coordinator UL rated. Drop arm type gravity door coordinator. Adjustable. Field reversible.

HDCC2512: Heavy Duty Crash Chain Heavy duty steel chain prevents door from opening wide when caught by high winds.

Finishes include: Duro, Silver Coated, Duranodic, Oil Rubbed Bronze, Satin Chrome, Polished Brass and Gray.

Reinforce deadbolt security strikes beef up the frame area that secures the deadbolt. Flip-up bolts are used to secure stationary doors in steel, glass-aluminium or wood doors.

---

Patio Lock, Knob Shroud & Cross Bore Relocation Drill Guide

Octopod patio door lock, kee blok lockout shroud & cross bore relocation drill guide

Ideal for sliding patio doors, sliding windows, swinging doors, double doors, french doors & other applications. Can be used on narrow stile doors and frames with a width of only 1-5/8". Lock housing accepts standard 1-1/8" mortise cylinder (not included) allowing it to be keyed to other locks in a system. Mounts at top or bottom of door. Equipped with a 3/8" diameter x 9" long locking bolt with a 2-3/8" throw standard. Other models available by special order for Assa & Medeco cylinders and finishes other than the standard. aluminum finish.

Kee Blok Lockout Shroud:

Blocks all existing keys to knob locks or padlocks in seconds. Fits 90% of knob locks as well as many popular models of padlocks. Compact unit is constructed of high strength aluminum alloy. A model is also made for lever handles and is available by special order.

Cross Bore Relocation Drill Guide:

Easy way to correct a mis-drilled cross bore or to relocate a backset from 2-3/8" to 2-3/4" or vice versa. Remove existing lock and install the HIT-23 in the latch hole. Re-drill using a hole saw with the drill blank installed. For both 1" and 1-1/8" face plates with a 1" diameter latch hole. Solid steel construction.

Octopod patio door lock can also be used as a secondary locking device for sliding doors, garage doors, gates and double-door systems. Kee blok lockout shroud is used to block key use, often in rental situations.

---

Bolt Buddy Door Reinforcement Products

The Bolt Buddy door & jam strikers

BOLT BUDDY: and related accessories strengthen an protect the weakness of the door jamb, door, deadbolt and hinges. these products are revolutionary on the market and prevent the burglar from gaining easy access to your home or business by prying the door.

The two steel bracket system is bolted from the inside to the outside of the door jamb. This system acts like a vise equalizing the stress of an attack over the entire door and door frame, helping to prevent the splitting of doors and door jambs. The sturdy BOLT BUDDY has SECURITY inscribed on the outside plates which also act as a visual deterrent.

Available in many different colors to match existing hardware. Many accessories available. All products PATENTED. Highly recommended by security professionals.

Door & Jamb Strikers:

Door Striker: Used to reinforce drive-in style deadbolts by supporting the outer edge of the bolt collar and can be used to allow existing older style bolts with an outer flange to be replaced by drive-in bolts. Helps repair and align previously damaged bolt tunnels in kicked-in doors in home and businesses. Helps to distribute force to the BOLT BUDDY and the door frame.

Jamb Striker:

Used to replace new or existing strikers for added reinforcement. Many existing door frames have had their original strikers moved a number of times because of misalignment with the existing bolt. Over time this usually leaves a number of chisel marks on the frame. The installation of the STRIKER will help cover these marks and will match your BOLT BUDDY in colour and length. High security screws are also included that match the bolts of the BOLT BUDDY. The plates are designed to allow for bolts from the BOLT BUDDY to pass the screws of the strike without interference. The STRIKER helps to distribute force to the BOLT BUDDY and wall framing. Many frames can be salvaged after a break-in by using glue, a BOLT BUDDY and a STRIKER.

Both Door & Jamb Strikers:

Both door and jamb strikers also help to keep doors and jambs square and distribute pressure from prying or jacking to the framing members. The screw holes in the plate are not countersunk (which leaves a knife edge that will allow the screw heads to tear out of the holes) but are "stretched" to supply a greater surface area of plate against the screw head. The extended holes also allow for a better grip on the surface of both the door and jamb. High security 1/4" diameter screws are supplied in each set to match the colour and style of your BOLT BUDDY.

---

Bolt Buddy Door Reinforcement Products

Jimmy Plates, door viewers & hinge screws

The Jimmy Plate is designed to work in conjunction with the BOLT BUDDY.

Many commercial doors have hollow steel frames. Unfortunately, when the frames are hollow this allows for a crowbar or screw driver to crush the frame away from the extended deadbolt.

Designed to work in conjunction with the BOLT BUDDY our Jimmy Plate is easily placed underneath the interior or exterior BOLT BUDDY door plate.

A corresponding slot is cut (grinding wheel, sawsall, etc.) into the door frame that will accept the flange of the Jimmy Plate. With the door in a closed position the frame and the door will be interconnected thus helping to prevent the frame from being crushed and pulled away from the extended deadbolt.

Door Viewer:

The Door Viewer is solid brass construction and has an interior lens shutter. It has 180º glass optic lens.

Body Features: Solid brass construction. No plastic to crack or break. Lens shutter prevents dust, etc. from collecting on the lens and allows for a finished look to the most expensive doors. Glass optic lens helps prevent "fogging" and allows more light for night viewing.

Installation Features: Extra wide flanges help with ease of installation for D.I.Y. installers. Coverage for "oval or "splintered" holes. Fits doors from 1-1/2" to 2-1/4" thick for standard and custom doors. Flexible hole size 7/8" (preferred) to 1" hole size.

Security Features: Lens shutter prevents viewing from exterior to interior and prevents interior light from shinning through viewer (not so obvious for visitors to tell when your looking out). Allows for a "finished" look to the most expensive doors. 180º Ultra wide view for maximum view from top, bottom and side of door. Helps prevent "surprise" visitors. Large lens allows for less distortion of view and allows more light for easier night viewing.

Hinge Screw:

The Hinge Screw is used to prevent closed doors from being removed from their hinges when the hinge pins are removed. A screw is removed from the door side of the hinge and the corresponding screw from the jamb side. The jamb side or door side (whichever is most convenient) then receives the Hinge Screw. When the door is closed the protruding head of the screw enters the corresponding screw hole on the other hinge plate thus not allowing the hinges to pass one another when the hinge pins are removed. For use in steel or concrete frames use an appropriate sized expandable plug.

Adjustable to various penetrating depths into the door. The reason for this is to allow the screw to penetrate to a maximum depth into the door and frame so that it may be protected by the BOLT BUDDY on the frame and door.

---

Bolt Buddy Door Reinforcement Products continued

High security chain assembly

The high security chain assembly plates are mounted "under" the BOLT BUDDY plates on the inside, this makes it the strongest security chain on the market. No screws to pop out when the door is forced. Chain made of sturdy gauge steel. Excellent security against home invasions. Available in many different colours. Helps to reinforce double doors or as a night bolt. The high security chain is excellent for small children that like to answer the door.

---

Paul

Paul, seen here standing in front of a Lock Surgeon service vehicle has worked for Lock Surgeon for over 8yrs. Paul is a locksmith that is currently enrolled in the locksmith apprenticeship program. This year Paul will complete his final year and become a journeyman locksmith. His years of experience in a variety of jobs relating to door break-in repair and door hardware replacement and repair give him a solid foundation of experience to apply to all of his jobs. Paul works with a team of other door break-in repair and lock repair service staff and works under the supervision of a journeyman locksmith. Lock Surgeon is proud to have Paul work with us and is excited about Paul's continued growth in the Locksmith service industry.

---

---

---

Click the link to find a location or service provider nearest you:

---

WARRANTY

Sometimes Things Happen

No one likes it when things go wrong, no one more than us, but if it does check out our Warranty

Read Our Warranty

---

A World of Security™
Home of the Giant Padlock!

---