Always Mobile

Always Mobile

Edmonton 780-448-9243

Calgary 403-770-5625

Door Reinforcements & Strikes Hardware Product Listings


Product Presented in "Like" Groups For Easy Reference.


Don-Jo Cylindrical & Deadbolt Wrap Around Plates

Wrap around plates for cylindrical door locks and deadbolts

Wrap around plates for cylindrical door locks and deadbolts

Door wraps are used to provide additional security to doors and or make repairs where door has been attacked during a break-in event. Our handy locksmith and door repairmen can match your door handle or deadbolt requirements to the correct door wrap reinforcement.


Don-Jo Combo & Blank Wrap Around & Edge Reinforcer

Combination wrap around plates with 2 Holes, Blank wrap around with trim screws, Door edge reinforcer for deadbolts Key-in-knob locks<

Combination wrap around plates with 2 Holes, Blank wrap around with trim screws, Door edge reinforcer for deadbolts & Key-in-knob locks

Double-hole door wraps are used to reinforce or repair door damage by providing additional security to both the handle and deadbolt at the same time. Blank sets are available for custom backsets or custom sized holes. Door edge reinforcement can be used to avoid backset and hole size issues. Our mobile door fixing crew and locksmiths will match the right door wrap product to your needs whether for repairs or additional security.


Don-Jo Specialty Wrap Around

Mortise lock wrap around plate for 86 cut-out, for use with heavy duty grade 1 and 2 key-in-lever, for KABA/Simplex 1000, for conversion of Simplex 1000 series and alarm lock DL2500, 2700/T2 & 3000 series

Mortise lock wrap around plate for 86 cut-out, for use with heavy duty grade 1 & 2 key-in-lever, for KABA/Simplex 1000, for conversion of Simplex 1000 series & alarm lock DL2500, 2700/T2 & 3000 series

These unique and custom shaped door wraps provide additional security or repair for lock-sets such as the simplex unican digital entry or mortise cassettes.


Don-Jo Inswing, Narrow Stile & Universal Latch Guards

Inswing latch guard, narrow stile latch guards for aluminium entrance door latches and electric strikes

Inswing latch guard, narrow stile latch guards for aluminium entrance door latches & electric strikes


Don-Jo Outswing Latch Guards

Outswing latch guards

Outswing latch guards

A variety of latch guards are available to provide door latch security in a number of situations for commercial doors, warehouse doors, apartment doors and storefront doors. There are also some latch guards that will accommodate electric strikes.


Don-Jo Outswing & Electric Strike Latch Guards

Outswing latch guards, universal latch guard and slipper latch protector

Outswing latch guards, universal latch guard & slipper latch protector

Outswing latch guard is made to protect latches on doors such as laundry rooms, apartments, commercial glass-aluminium doors. The universal latch guard is stocked on our mobile service trucks to allow for quick fix by our door and lock service repair personnel.


Don-Jo Filler & Conversion Plates, Electric Strike Filler Plates & Scar Plates

Filler and conversion plates, electric strike filler plates and scar plates

Filler & conversion plates, electric strike filler plates & scar plates

Door filler and scar plates are used when changing the function of a door or hardware item.


Don-Jo Hole Filler Plates, Remodel Kit, Door Pull & Hinge Pins

Hole filler plates, remodel plates kit, door pulls hinge pins

Hole filler plates, remodel plates & kit, door pulls & hinge pins

Filler plates and remodel kits are used to fill deadbolt or handle holes that are no longer required or cover damaged areas.


Don-Jo Lip Strikes, Long Strikes, Push/Pull Plate & Kick Plates.

2-3/4 inch extended lip strikes, long strikes and push/pull plate and kick plates

2-3/4" extended lip strikes, long strikes & push/pull plate & kick plates

Lip strikes can be used where door jambs are wider than standard. Long strikes are typically used to reinforce the door frame edge and repair deadbolt strike area from damage that may have incurred by break-in attempts or preventatively to stop break-in attempts from occurring. Kick plates are added to the bottom of the door to reduce the wear in the foot traffic area.


Don-Jo Deadbolt Security Strike, T-Strike & Door Hardware

Deadbolt security strikes, T-Strike door hardware

Deadbolt security strikes, T-Strike & door hardware

Reinforce deadbolt security strikes beef up the frame area that secures the deadbolt. Flip-up bolts are used to secure stationary doors in steel, glass-aluminium or wood doors.


Patio Lock, Knob Shroud & Cross Bore Relocation Drill Guide

Octopod patio door lock, kee blok lockout shroud cross bore relocation drill guide

Octopod patio door lock, kee blok lockout shroud & cross bore relocation drill guide

Octopod patio door lock can also be used as a secondary locking device for sliding doors, garage doors, gates and double-door systems. Kee blok lockout shroud is used to block key use, often in rental situations.


Bolt Buddy Door Reinforcement Products

The Bolt Buddy door and jam strikers

The Bolt Buddy door & jam strikers

Bolt Buddy and related accessories strengthen and protect the weakness of the door jamb, door, deadbolt and hinges. These products are revolutionary on the market and prevent the burglar easy access by kicking and prying the door. The two steel bracket system is bolted from the inside to the outside of the door jamb. This system acts like a vise equalizing the stress of an attack over the entire door and door frame, helping to prevent the splitting of doors and door jambs. The sturdy BOLT BUDDY has SECURITY inscribed on the outside plates which also act as a visual deterrent. Available in many different colours to match existing hardware - Many accessories available. All products PATENTED - Highly recommended by security professionals.

Door Striker: used to reinforce drive-in style deadbolts by supporting the outer edge of the bolt collar and can be used to allow existing older style bolts with an ourter flange to be replaced by drive-in bolts - Helps repair and align previously damaged bolt tunnels in kicked-in doors in homes and businesses. Helps to distribute force to the BOLT BUDDY and the door frame.

Jamb Striker: Used to replace new or existing strikers for added reinforcement - Many existing door frames have had their original strikers moved a number of times because of misalignment with thte existing bolt. Over time this usually leaves a number of chisel marks on the frame. The installation of the STRIKER will help cover these marks and will match your BOLT BUDDY in colour and length - High security screws are also included that match the bolts of the BOLT BUDDY. The plates are designed to allow for bolts from the BOLT BUDDY to pass the screws of the strike without interference - The STRIKER helps to distribute force to the BOLT BUDDY and wall framing - Many frames can be salvaged after a break-in by using a BOLT BUDDY and a STRIKER.

Both Door and Jamb Strikers: Both door and jamb strikers also help to keep doors and jams square and distribute pressure from prying or jacking to the framing members - The screw holes in the plate are not countersunk (which leaves a knife edge that will allow the screw heads to tear out of the holes) but are "stretched" to supply a greater surface area of plate against the screw head. The extended holes also allow for a better grip on the surface of both the door and jamb - High security 1/4" diameter screws are supplied in each set to match the colour and style of your BOLT BUDDY.


Bolt Buddy Door Reinforcement Products

Jimmy Plates, door viewers and hinge screws

Jimmy Plates, door viewers & hinge screws

The Jimmy Plate is designed to work in conjunction with the BOLT BUDDY. Many commercial doors have hollow steel frames. Unfortunately, when the frames are hollow this allows for a crowbar or screw driver to crush the frame away from the extended deadbolt. Designed to work in conjunction with the BOLT BUDDY our Jimmy plate is easily placed underneath the interior or exterior BOLT BUDDY door plate. A corresponding slot is cut (grinding wheel, sawsall, etc) into the door frame that will accept the flange of the Jimmy Plate. With the door in a closed position the frame and door will be interconnected thus helping to prevent the frame from being crushed and pulled away from the extended deadbolt.

The Door Viewer is a solid brass construction and has an interior lens shutter. It has 180º glass optic lens.

Body Features: Solid brass construction. No plastic to crack or break - Lens Shutter prevents dust, etc. from collecting on the lens and allows for a "finished" look tot the most expensive doors - Glass Optic Lens helps prevent "fogging" and allows more light for night viewing.

Installation Features: Extra Wide Flanges help with ease of installation for D.I.Y. installers. Coverage for "oval" or "splintered" holes - Fits doors from 1-1/2" to 2-1/4" thick for standard and custom doors - Flexible Hole Size 7/8" (preferred) - 1" hole size

Security Features: Lens Shutter prevents viewing from exterior to interior and prevents interior light from shining through viewer (not so obvious for visitors to tell when your looking out). Allows for a "finished" look to the most expensive doors - 180º Ultra Wide View for maximum view from top, bottom and side to side of door. Helps prevent "surprise" visitors. Large lens allows for less distortion of view and allows more light for easier night viewing.

The Hinge Screw is used to prevent closed doors from being removed from their hinges when the hinge pins are removed. A screw is removed from the door side of the hinge and the corresponding screw from the jamb side. The jamb side or door side (whichever is most convenient) then receives the Hinge Screw. When the door is closed the protruding head of the screw enters the corresponding screw hole on the other hinge plate thus not allowing the hinges to pass one another when the hinge pins are removed. For use in steel or concrete frames, use an appropriate sized expanding plug. Adjustable to various penetrating depths into the jamb an the door. The reason for this is to allow the screw to penetrate to a maximum depth into the door and frame so that it may be protected by the BOLT BUDDY on the frame and door.


Bolt Buddy Door Reinforcement Products continued

High security chain assembly

High security chain assembly



A World of Security™

Home of the Giant Padlock!

© Lock Surgeon 1989 - 2019 | No content may be used without permission.